 |
| TD27/28 |
PBT: Poly Butylene Terephthalate
PBT is tough, rigid and excellent in thermal aging
resistance.
In addition, the electrical characteristics are
great in a wide temperature range, the water absorbency is low, and weather resistance and chemical resistance are well balanced.
(PBT is used for TD27/TD28, TD99 etc.)
PA: Polyamide
 |
| TD118 |
Polyamide has good mechanical properties, and it is
resistant to tension, compression, bending and impact.
It is not easily damaged. It is also resistant to heat and can withstand more than 160 ℃ if glass fiber is added.
Moreover, chemical resistance and oil resistance are
very strong and are not affected by machine oil.
PC: Polycarbonate
 |
| TD88 |
Polycarbonate is a plastic with high transparency and
impact resistance. Its heat resistant temperature is
120 ℃- 130 ℃ and it has high resistance in resin. Its cold resistance is around -100℃. Even among resins, it has considerable resistance at low temperature, and it is highly resistant even at high temperature range.
impact resistance. Its heat resistant temperature is
120 ℃- 130 ℃ and it has high resistance in resin. Its cold resistance is around -100℃. Even among resins, it has considerable resistance at low temperature, and it is highly resistant even at high temperature range.
(PC is used for TD88, TD96 etc.)
Polyacetal is a material excellent in abrasion resistance and is self-lubricating. It is also excellent in mechanical properties such as rigidity and toughness, and it has high temperature stability.
POM is a material that is often used as a substitute for metals, especially due to these properties.
POM is a material that is often used as a substitute for metals, especially due to these properties.
(POM is used for TD14.)
PEI: Poly Ether Imide
 |
| TD69 |
strength, and also shows good processability.
It maintains mechanical strength even at high
temperature and is excellent in flame retardancy. It is also excellent in chemical resistance and strong
against hot water. In addition, it shows stable
electrical characteristics and withstands
ultraviolet rays and radiation.
(PEI is used for TD69)
PPS: Poly Phenylene Sulfide
Poly Phenylene
Sulfide has excellent heat resistance, so it can be
used for a long time at high temperature. It’s also excellent
in chemical resistance,
so with oils and fats
that dissolve PPS at 200 ° C or lower, there is no solvent. It is also
excellent in flame retardancy, tensile strength and bending strength. It has a feature that the shrinkage ratio during molding is small, so it has dimensional
stability.
(PPS is used for customized products)
PES: Poly Ether Sulphone
It is also excellent in mechanical
properties, and chemical
properties such as hot water resistance, chemical resistance, flame retardancy,
and molding processability. By taking advantage of these features it is used in
a wide range of fields,
such as electronic parts, automobiles, aircraft, medical care, food, paint and
so on.
(PES is used for customized products)
Die Casting
Die casting is a casting method in which non-ferrous metals are melted in precision molds, and are poured at high speed and pressure using a die-casting machine and molded instantaneously. Die cast products have superior features such as high dimensional accuracy, excellent strength, and beautiful appearance.
Die casting is a casting method in which non-ferrous metals are melted in precision molds, and are poured at high speed and pressure using a die-casting machine and molded instantaneously. Die cast products have superior features such as high dimensional accuracy, excellent strength, and beautiful appearance.
ZDC: Zinc Die Casting
 |
| TD42 |
so it is possible to manufacture parts with
complicated shapes and parts with extremely high dimensional accuracy. In addition, it enables
advanced thinning, and because of its small
draft angle, it is easy to mold after casting.
(Zinc Die Casting is
used for TD42, TD112 etc.)
ADC: Aluminum Die Casting
It is economical and easy to cast, so aluminum die casting is a suitable method for mass production. It can produce products with high strength, excellent conductivity, thermal conductivity, excellent corrosion resistance and processability.
(Aluminum Die Casting is used for customized products)
TOK Newsletter
TOK will provide ONLY subscribers with valuable technical information.
The newsletter will be delivered about once per month, If you would like to receive the newsletter from us, you can subscribe via our contact form.
Written by Mayu